TECHNICAL MORTARS

TRUCCSA

MORTARS

TECHNICAL

TR UNEX

Product designed to facilitate the anchoring of cementitious and lime mortars to smooth concrete and substrates with low superficial absorption rate such as ceramic, glass, plastics, etc.

Easy and quick application. Single-component product. Quick drying. Excellent anchoring effect. Water-based, nonflammable and nontoxic. Suitable to apply in interiors and exteriors over mortars and claddings of cement, ceramic bricks, natural stone, smooth concrete and all types of bases free from capillarity. Excellent workability.

Plastic buckets of 5kg and 15kg.

TRUCCSA

MORTARS

TECHNICAL

OXISTOP

Oxistop is an active restorative primer for alkaline environments. It contains corrosion suppressor additives to protect structures made of steel, deposits and metal silos. Once it is mixed with water, it can be applied with a brush over clean reinforced concrete.

Excellent corrosion suppressor properties as it reinstates a high pH environment. It contains suppression additives to protect steel. Modified with polymers to increase the adhesion to steel. It does not affect the anchoring of cladded steel. Perfect compatibility with the steel of reinforced concrete and repair mortars. Quick hardening: Time saving. Single-component, only to be mixed with water. It hardens in wet and closed areas. Green colour.

Resealable plastic buckets of 4Kg and 15 Kg.

TRUCCSA

MORTARS

TECHNICAL

TR DUROFLEX

Mortar of only one component, with high mechanical features. Especially indicated for structural protection of concrete, facing the oxidation of metallic armatures.
This product is made of cement, quartz, synthetic resins and passivation protectors of the structural oxidation of the reinforced concrete. It is fortified with fiberglass, and it meets the requirements of class R4 of UNE-EN 1504-3.

Rehabilitation and repair of concrete deteriorated through corrosion of armatures or carbonation. Reparation of pillars, columns, main beams, balconies, corbels and retaining walls. Reparation of concrete pavement. In walls, roofs and floors. In exposed concrete or buried. For interiors and exteriors.

Sacs of 25Kg. Pallets of 600 Kg (24 sacs)

TRUCCSA

MORTARS

TECHNICAL

TR UNEX TACK

Copolymer dispersion, watery base based on acrylic acid esters, especially indicated as bonding bridge between cladding and concrete, and in general over any standard substrate used in construction.

Tr Unex Tack, acts piercing and compressing the particles of treated surfaces, improving the adhesive properties between the substrate and the cladding used, as well as to improve the flexural properties. High adhesion power. High durability of permanent tack. High degree of penetration. Formation of a highly elastic layer and resistant to alkalinity. It does not contain solvents.

Bottles of 5 liters and 25 liters.

TRUCCSA

MORTARS

TECHNICAL

TR HIDROSTOP

Mortar for the treatment of rising damp in plinths, preventing the emergence of water stains. It is employed in the renovation of walls affected by capillary moisture dampness and efflorescence. It can also be employed as preventive treatment for future capillary moisture dampness and whenever it is necessary to carry out a quick and easy repairs.

Highly permeable to water vapour.
Rainwater proof.

25 kgs double sheet sacs.
Pallets of 1200 Kg.

TECHNICAL MORTARS

MORTARS

TECHNICAL

MORTARS

TECHNICAL

MORTARS

TECHNICAL

MORTARS

TECHNICAL

MORTARS

TECHNICAL

DOWNLOADS AND DOCUMENTATION

See all the information on Mortars Technical.

© Copyright 2023. Truccsa. Todos los derechos reservados.

Aviso Legal | Política de Privacidad | Política de Cookies | Política de Calidad

Diseño Brande.es